[A6] A6 Crashing Cubase

[Joan Touzet]

Never used that precise setup, but can you check that you don't have
midi looping going on? Try removing one of the cables to the A6
depending on what you need - otherwise you may be getting echoes that
build up and overwhelm the MIDI bus. Used to run into this a lot in
other studio setups. SOrry that I don't have specifics on how to
diagnose or check for this at hand...

-Joan

On 6/15/07, Ronnie <ronnie at nvisibl.com> wrote:
>
>
>
>
> Hey there, new to the A6 and really digging the sound and functionality.
>
>
>
> I sincerely hope someone here can help me out with this one.
>
>
>
> I'm having some difficulty incorporating the A6 into my setup. It's
> basically taking the place of my previous Triton Extreme as the master
> keyboard, and what I am finding is that it's crashing Cubase SX3. Cubase
> freezes when I play even a couple of notes on the A6. The Midi signal is
> lost and stuck notes occur randomly here and there on the A6 or throughout
> my setup.
>
>
>
> I have the following:
>
>
>
> A6 Midi In/Out to In/Out of M-Audio Audiophile USB interface
>
> All the rest of my kit is connected In/Out to a Steinberg Midex
>
>
>
> A6 Global/ Midi – I turned everything OFF, except Banksel which is set to
> 'Normal'.
>
> Global/ Midi/ Panel – RXMODE, ON, TXTHIN = Thin, TXMODE = Midi
>
>
>
> I thought at first that there was too much midi info coming from the A6 so I
> stripped the midi config down as above but the issue with Cubase remains.
>
>
>
> I use it in Mix mode with 3 parts/ Midi channels enabled.
>
>
>
> Cubase SX3
>
> WinXP SP2
>
> DELL PC 3.1Gghz Processor 512MB Memory
>
>
>
>
>
> Can anyone offer any advice?
>
>
>
> Many thanks
>
>
>
> Ronnie
>
>
>
>
> _______________________________________________
> A6 mailing list
> A6 at code404.com
> http://mailman.code404.com/mailman/listinfo/a6
>
>