[A6] A6 Crashing Cubase

[elmacaco]

I remember this, I found it annoying for other reasons, but in mix mode, hit soft button 5, KBD and there should be an enable button which is default to on, turn that to off for everything but channel 1 or whatever channel you want to transmit on, and then you're good to go.

I hated it because I couldn't just hit the Mix part button and play just that part from the keyboard without going in and disabling the kbd from the previous mix channel and enabling it in next one.  I wanted to do stuff with the sequencer with the Andromeda as a stand alone, but I haven't figured out a way to do this without an external sequencer and the A6 set to local off (MIDI).  I wish there was a KBD enable 'solo' mode, where they are all enabled but only the selected part will play from the keyboard.

Unless I am missing something?

Peace

Ed
  ----- Original Message ----- 
  From: Ronnie 
  To: jammer at jammer.biz 
  Cc: a6 at code404.com 
  Sent: Saturday, June 16, 2007 11:19 AM
  Subject: RE: [A6] A6 Crashing Cubase


  Thanks Jammer, I disabled midi thru on Cubase and it worked fine though I'm unable then to utilise the A6 as the Master Midi keyboard.

   

  I tried also keeping Midi thru enabled but using the midi filter to filter out all info but the Note data. Unfortunately the problem remained the same with Cubase freezing.

   

  Would be great if you remembered how you got round this in the past.

   

  Sincerely

  -Ronnie

   

   

   

   

   

  -----Original Message-----

  From: a6-bounces at code404.com [mailto:a6-bounces at code404.com] On Behalf Of Jammer

  Sent: 16 June 2007 10:39

  Cc: a6 at code404.com

  Subject: Re: [A6] A6 Crashing Cubase

   

  Ronnie wrote:

  > Thanks Russ, gave that a go and it seems that the A6 is transmitting 

  > on all active mix channels at the same time, including velocity 

  > information. So that may explain the midi overload?

  > 

  > However I am unsure that Cubase would receive on all channels at the 

  > same time? But it does seem to be a general anomaly from the A6 in 

  > relation to my other instruments, which transmit from their 

  > Mix/Multi's on whichever single channel is active in the Monitor or 

  > Cubase.

  > 

  > In the A6 menu - Mix/Prog/MidiCH = 1, 2, and 3 (depending on which of 

  > the 3 mix parts are selected) So I would think that this would ensure 

  > transmission only on the corresponding sequencer channel?

  > 

  > Would anyone know how I can stop all channels of a Mix from 

  > transmitting Midi data at the same time no matter which channel is 

  > selected on the external sequencer?

  > 

  > Many thanks

   

  i've had this exact problem with the A6 and SX3 ... in cubase have a 

  play with the midi thru setting ...

   

  i'm off to the studio in a mo and will check out what i did to fix this 

  issue, can't remember off the top of my head.

   

  jammer

   

   

  -----Original Message-----

  From: a6-bounces at code404.com [mailto:a6-bounces at code404.com] On Behalf Of Russell Hoffman

  Sent: 15 June 2007 23:20

  To: a6 at code404.com

  Subject: Re: [A6] A6 Crashing Cubase

   

  It might be a good idea to get a separate "midi monitor" program and  

  run it

  without Cubase running, just to see what's coming out of the A6. And  

  compare

  that to your other midi devices. It might point out something obvious.

   

  Russ

   

   

   

  On Jun 15, 2007, at 5:40 PM, Ronnie wrote:

   

  > Thanks very much Joan...

  >

  > I disconnected Midi In cable from the A6 and it remains the same.

  > Press

  > a few notes on the A6 and everything freezes.

  >

  > I reconnected Midi In and disconnected Midi Out from the A6, rebooted 

  > Cubase and all is fine, with the A6 receiving and playing Midi from 

  > Cubase alongside the other gear.

  >

  > I'm stumped, and would deeply appreciate any other ideas yourself or 

  > others might have.

  >

  > Sorry to be such a noob

  >

  > Ronnie

  >

  >

   

  _______________________________________________

  A6 mailing list

  A6 at code404.com

  http://mailman.code404.com/mailman/listinfo/a6

   

   

   



------------------------------------------------------------------------------


  _______________________________________________
  A6 mailing list
  A6 at code404.com
  http://mailman.code404.com/mailman/listinfo/a6
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.code404.com/pipermail/a6/attachments/20070616/088ed0bf/attachment-0001.htm