From elmacaco at hotmail.com Wed May 2 09:35:24 2007 From: elmacaco at hotmail.com (elmacaco X) Date: Mon Feb 22 19:52:21 2010 Subject: [A6] SKB-5817W Case for Andromeda? In-Reply-To: Message-ID: Hi, I read in the FAQ that SKB cases weren't deep enough for the A6,and somehow damage the sides, but the SKB site now lists the Andromeda as fitting their 88 key case, has anyone used this for air travel? Or at all? Does anyone know if it will work? Any other case recomendations are most welcome. Thanks Ed _________________________________________________________________ Get a FREE Web site, company branded e-mail and more from Microsoft Office Live! http://clk.atdmt.com/MRT/go/mcrssaub0050001411mrt/direct/01/ From msochynsky at gmail.com Wed May 2 12:18:40 2007 From: msochynsky at gmail.com (michael sochynsky) Date: Mon Feb 22 19:52:21 2010 Subject: [A6] new to list.. and the A6.. basic question Message-ID: hello everyone. i am brand new to this list and a one-week owner of the synth. my question is very basic, and is probably answered all the time: is it normal for all A6 to have the clock end up on BPMs w/ decimals? is there any way to run the arp/sequencer/lfos on standard BMPs with whole numbers. i read somewhere that an external midi clock can be used for this, but is there any way to fix this problem solely using the A6? any help or pointers are appreciated. the reason i want to avoid midi is because i will use A6 in live set up with no midi at all, just quarter inch out for minimal confusion and complexity in my set up on stage. any ideas? thanks!! michael -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mailman.code404.com/pipermail/a6/attachments/20070502/b6b0748d/attachment.htm From dsbaikov at gmail.com Wed May 2 12:53:08 2007 From: dsbaikov at gmail.com (Dmitry Baikov) Date: Mon Feb 22 19:52:21 2010 Subject: [A6] SKB-5817W Case for Andromeda? In-Reply-To: References: Message-ID: <70a871c80705021253y7e93d2b2qdda5831395aa2031@mail.gmail.com> On 5/2/07, elmacaco X wrote: > I read in the FAQ that SKB cases weren't deep enough for the A6,and somehow > damage the sides, but the SKB site now lists the Andromeda as fitting their > 88 key case, has anyone used this for air travel? Or at all? Does anyone > know if it will work? Specs says it will. > Any other case recomendations are most welcome. Hi, I'm considering Gator GK-261R http://gatorcases.com/productsmodeldetail.aspx?LID=3&PID=46&MID=205 >From the specs it is smaller and weights noticeably less than SKB's 88key. Though, I haven't seen/tried the real thing yet. Dmitry. From kwalker at freenet.co.uk Wed May 2 13:05:30 2007 From: kwalker at freenet.co.uk (Kevin Walker) Date: Mon Feb 22 19:52:21 2010 Subject: [A6] new to list.. and the A6.. basic question In-Reply-To: References: Message-ID: yes, if you look to the right of the screen, under the contrast knob. you will see two buttons. they are used for fine parameter adjustment. kev On 02/05/07, michael sochynsky wrote: > > hello everyone. i am brand new to this list and a one-week owner of the > synth. my question is very basic, and is probably answered all the time: > > is it normal for all A6 to have the clock end up on BPMs w/ decimals? is > there any way to run the arp/sequencer/lfos on standard BMPs with whole > numbers. i read somewhere that an external midi clock can be used for this, > but is there any way to fix this problem solely using the A6? any help or > pointers are appreciated. the reason i want to avoid midi is because i will > use A6 in live set up with no midi at all, just quarter inch out for minimal > confusion and complexity in my set up on stage. any ideas? > thanks!! > michael > > _______________________________________________ > A6 mailing list > A6@code404.com > http://mailman.code404.com/mailman/listinfo/a6 > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mailman.code404.com/pipermail/a6/attachments/20070502/523a35de/attachment.htm From dsbaikov at gmail.com Wed May 2 13:07:34 2007 From: dsbaikov at gmail.com (Dmitry Baikov) Date: Mon Feb 22 19:52:21 2010 Subject: [A6] new to list.. and the A6.. basic question In-Reply-To: References: Message-ID: <70a871c80705021307n610cb8c2o4039ceb7ec5539d3@mail.gmail.com> Welcome! Are you from Russia? On 5/2/07, michael sochynsky wrote: > is it normal for all A6 to have the clock end up on BPMs w/ decimals? is yes. > pointers are appreciated. the reason i want to avoid midi is because i will > use A6 in live set up with no midi at all, just quarter inch out for minimal > confusion and complexity in my set up on stage. any ideas? I think it is not needed, either you have only Andromeda and no need for exact bpm, or you have several devices and then you need midi clock, because "exact" bpms of several devices will drift. Dmitry. From dsbaikov at gmail.com Wed May 2 13:09:04 2007 From: dsbaikov at gmail.com (Dmitry Baikov) Date: Mon Feb 22 19:52:21 2010 Subject: [A6] new to list.. and the A6.. basic question In-Reply-To: References: Message-ID: <70a871c80705021309m3f917e3bm397fe53b2425fdf0@mail.gmail.com> On 5/3/07, Kevin Walker wrote: > yes, if you look to the right of the screen, under the contrast knob. you > will see two buttons. they are used for fine parameter adjustment. Thanks! Even if I am not an original poster ;) Never noticed it. From msochynsky at gmail.com Wed May 2 14:19:52 2007 From: msochynsky at gmail.com (michael sochynsky) Date: Mon Feb 22 19:52:21 2010 Subject: [A6] new to list.. and the A6.. basic question In-Reply-To: References: Message-ID: hmm.. i am familiar with these buttons, but the problem is that they are definitely not FINE adjustment.. a single click adjusts the BPM from anywhere from 1-2 bpms, routinely ending on where 192.34, 193.78, 195.23 etc etc... does this make sense? any idea why this is? is this a design flaw? is it something specific to my model? any other help is appreciated. thanks! michael On 5/2/07, Kevin Walker wrote: > > yes, if you look to the right of the screen, under the contrast knob. you > will see two buttons. they are used for fine parameter adjustment. > > kev > > On 02/05/07, michael sochynsky wrote: > > > hello everyone. i am brand new to this list and a one-week owner of the > > synth. my question is very basic, and is probably answered all the time: > > > > is it normal for all A6 to have the clock end up on BPMs w/ decimals? is > > there any way to run the arp/sequencer/lfos on standard BMPs with whole > > numbers. i read somewhere that an external midi clock can be used for this, > > but is there any way to fix this problem solely using the A6? any help or > > pointers are appreciated. the reason i want to avoid midi is because i will > > use A6 in live set up with no midi at all, just quarter inch out for minimal > > confusion and complexity in my set up on stage. any ideas? > > thanks!! > > michael > > > > _______________________________________________ > > A6 mailing list > > A6@code404.com > > http://mailman.code404.com/mailman/listinfo/a6 > > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mailman.code404.com/pipermail/a6/attachments/20070502/25f507e5/attachment.htm From elmacaco at hotmail.com Wed May 2 16:01:26 2007 From: elmacaco at hotmail.com (elmacaco) Date: Mon Feb 22 19:52:22 2010 Subject: [A6] SKB-5817W Case for Andromeda? References: <70a871c80705021253y7e93d2b2qdda5831395aa2031@mail.gmail.com> Message-ID: Hi Dmitry, I am considering that one as well, but I think I'd go for the Gator Tour 61, it's a bit more robust with the wood and metal on all edges, and only adds 20-40 to the cost. http://gatorcases.com/productsdetail.aspx?LID=3&PID=47 It is quite a bit heavier, but more protected, and as it's for air travel, I think i's warrented in my case. Ed ----- Original Message ----- From: "Dmitry Baikov" To: "elmacaco X" Cc: Sent: Wednesday, May 02, 2007 2:53 PM Subject: Re: [A6] SKB-5817W Case for Andromeda? > On 5/2/07, elmacaco X wrote: >> I read in the FAQ that SKB cases weren't deep enough for the A6,and >> somehow >> damage the sides, but the SKB site now lists the Andromeda as fitting >> their >> 88 key case, has anyone used this for air travel? Or at all? Does anyone >> know if it will work? > Specs says it will. > >> Any other case recomendations are most welcome. > > Hi, I'm considering Gator GK-261R > http://gatorcases.com/productsmodeldetail.aspx?LID=3&PID=46&MID=205 > > From the specs it is smaller and weights noticeably less than SKB's 88key. > Though, I haven't seen/tried the real thing yet. > > Dmitry. > From mao.cla at libero.it Thu May 3 00:06:12 2007 From: mao.cla at libero.it (mao.cla@libero.it) Date: Mon Feb 22 19:52:22 2010 Subject: [A6] new to list.. and the A6.. basic question Message-ID: a little trick... press both "up&down? button at the same time... tempo will reset to 120.00 bpm... then use fine adjustment. :D > hmm.. i am familiar with these buttons, but the problem is that they are > definitely not FINE adjustment.. a single click adjusts the BPM from > anywhere from 1-2 bpms, routinely ending on where 192.34, 193.78, 195.23 etc > etc... does this make sense? any idea why this is? is this a design flaw? is > it something specific to my model? > any other help is appreciated. thanks! > michael > > On 5/2/07, Kevin Walker wrote: > > > > yes, if you look to the right of the screen, under the contrast knob. you > > will see two buttons. they are used for fine parameter adjustment. > > > > kev > > > > On 02/05/07, michael sochynsky wrote: > > > > > hello everyone. i am brand new to this list and a one-week owner of the > > > synth. my question is very basic, and is probably answered all the time: > > > > > > is it normal for all A6 to have the clock end up on BPMs w/ decimals? is > > > there any way to run the arp/sequencer/lfos on standard BMPs with whole > > > numbers. i read somewhere that an external midi clock can be used for this, > > > but is there any way to fix this problem solely using the A6? any help or > > > pointers are appreciated. the reason i want to avoid midi is because i will > > > use A6 in live set up with no midi at all, just quarter inch out for minimal > > > confusion and complexity in my set up on stage. any ideas? > > > thanks!! > > > michael > > > > > > _______________________________________________ > > > A6 mailing list > > > A6@code404.com > > > http://mailman.code404.com/mailman/listinfo/a6 > > > > > > > > > ------------------------------------------------------ Passa a Infostrada. ADSL e Telefono senza limiti e senza canone Telecom http://click.libero.it/infostrada From wayne.rudd at paradise.net.nz Thu May 3 00:55:08 2007 From: wayne.rudd at paradise.net.nz ('Wayne Rudd') Date: Mon Feb 22 19:52:22 2010 Subject: [A6] new to list.. and the A6.. basic question In-Reply-To: Message-ID: <024301c78d58$5ec66fd0$0401a8c0@wdr1> This is just the way it is with the A6 and BPM unfortunately. It is to do with the CPU update cycles (this is explained in the FAQ somewhere) . A lot of other synths actually have the same issue, but are less 'honest' about the BPM they are using (they report rounded numbers). _____ From: a6-bounces@code404.com [mailto:a6-bounces@code404.com] On Behalf Of michael sochynsky Sent: Thursday, 3 May 2007 9:20 a.m. To: Kevin Walker Cc: A6@code404.com Subject: Re: [A6] new to list.. and the A6.. basic question hmm.. i am familiar with these buttons, but the problem is that they are definitely not FINE adjustment.. a single click adjusts the BPM from anywhere from 1-2 bpms, routinely ending on where 192.34, 193.78, 195.23 etc etc... does this make sense? any idea why this is? is this a design flaw? is it something specific to my model? any other help is appreciated. thanks! michael On 5/2/07, Kevin Walker wrote: yes, if you look to the right of the screen, under the contrast knob. you will see two buttons. they are used for fine parameter adjustment. kev On 02/05/07, michael sochynsky wrote: hello everyone. i am brand new to this list and a one-week owner of the synth. my question is very basic, and is probably answered all the time: is it normal for all A6 to have the clock end up on BPMs w/ decimals? is there any way to run the arp/sequencer/lfos on standard BMPs with whole numbers. i read somewhere that an external midi clock can be used for this, but is there any way to fix this problem solely using the A6? any help or pointers are appreciated. the reason i want to avoid midi is because i will use A6 in live set up with no midi at all, just quarter inch out for minimal confusion and complexity in my set up on stage. any ideas? thanks!! michael _______________________________________________ A6 mailing list A6@code404.com http://mailman.code404.com/mailman/listinfo/a6 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mailman.code404.com/pipermail/a6/attachments/20070503/daa1087b/attachment.htm From wayne.rudd at paradise.net.nz Thu May 3 00:59:44 2007 From: wayne.rudd at paradise.net.nz ('Wayne Rudd') Date: Mon Feb 22 19:52:22 2010 Subject: [A6] new to list.. and the A6.. basic question In-Reply-To: Message-ID: <025301c78d59$03825f70$0401a8c0@wdr1> Not much of a trick? That won't change the values you can get for bpm. -----Original Message----- From: a6-bounces@code404.com [mailto:a6-bounces@code404.com] On Behalf Of mao.cla@libero.it Sent: Thursday, 3 May 2007 7:06 p.m. To: msochynsky Cc: A6 Subject: Re: [A6] new to list.. and the A6.. basic question a little trick... press both "up&down? button at the same time... tempo will reset to 120.00 bpm... then use fine adjustment. :D > hmm.. i am familiar with these buttons, but the problem is that they are > definitely not FINE adjustment.. a single click adjusts the BPM from > anywhere from 1-2 bpms, routinely ending on where 192.34, 193.78, 195.23 etc > etc... does this make sense? any idea why this is? is this a design flaw? is > it something specific to my model? > any other help is appreciated. thanks! > michael > > On 5/2/07, Kevin Walker wrote: > > > > yes, if you look to the right of the screen, under the contrast knob. you > > will see two buttons. they are used for fine parameter adjustment. > > > > kev > > > > On 02/05/07, michael sochynsky wrote: > > > > > hello everyone. i am brand new to this list and a one-week owner of the > > > synth. my question is very basic, and is probably answered all the time: > > > > > > is it normal for all A6 to have the clock end up on BPMs w/ decimals? is > > > there any way to run the arp/sequencer/lfos on standard BMPs with whole > > > numbers. i read somewhere that an external midi clock can be used for this, > > > but is there any way to fix this problem solely using the A6? any help or > > > pointers are appreciated. the reason i want to avoid midi is because i will > > > use A6 in live set up with no midi at all, just quarter inch out for minimal > > > confusion and complexity in my set up on stage. any ideas? > > > thanks!! > > > michael > > > > > > _______________________________________________ > > > A6 mailing list > > > A6@code404.com > > > http://mailman.code404.com/mailman/listinfo/a6 > > > > > > > > > ------------------------------------------------------ Passa a Infostrada. ADSL e Telefono senza limiti e senza canone Telecom http://click.libero.it/infostrada _______________________________________________ A6 mailing list A6@code404.com http://mailman.code404.com/mailman/listinfo/a6 From soarera6 at gmail.com Sat May 5 08:24:37 2007 From: soarera6 at gmail.com (Soarer A6) Date: Mon Feb 22 19:52:22 2010 Subject: [A6] I wanna change my bank! Message-ID: <21c7b5a00705050824i6414d761n26341135c9ae440d@mail.gmail.com> I use Vista now and A6 Banker has stopped working. So I haven't changed banks for several months. I tried to send out the bank to Bomes SendSX but the saved syx file is only 30 kb and it has to be 293 kb in order to be correct. Any idea what is wrong? Any other way to send out the bank? Is it possible to use Ableton Live to record the midi? Think I tried but it didn't work. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mailman.code404.com/pipermail/a6/attachments/20070505/06aee53d/attachment.htm From boozoozima at hotmail.com Wed May 9 01:34:33 2007 From: boozoozima at hotmail.com (TOM MURAT) Date: Mon Feb 22 19:52:22 2010 Subject: [A6] (no subject) Message-ID: boozoozima@hotmail.com _________________________________________________________________ D?couvrez le Blog heroic Fantaisy d'Eragon! http://eragon-heroic-fantasy.spaces.live.com/ From dougt55 at yahoo.com Tue May 15 01:18:12 2007 From: dougt55 at yahoo.com (Doug Terrebonne) Date: Mon Feb 22 19:52:22 2010 Subject: [A6] SRAM Card FS In-Reply-To: Message-ID: <253034.70504.qm@web81202.mail.mud.yahoo.com> Hi, I have a 512K Memory Card for $30 shipped in the US if anyone wants it. It gives you 2 additional Program Banks. From dougt55 at yahoo.com Wed May 16 19:44:16 2007 From: dougt55 at yahoo.com (Doug Terrebonne) Date: Mon Feb 22 19:52:22 2010 Subject: [A6] SRAM Card FS In-Reply-To: <253034.70504.qm@web81202.mail.mud.yahoo.com> Message-ID: <751653.42283.qm@web81205.mail.mud.yahoo.com> I also have a spare 2MB Card (6 additional Program Banks + 4 Mix Banks) for $65 shipped in the US... --- Doug Terrebonne wrote: > Hi, I have a 512K Memory Card for $30 shipped in the US if anyone > wants > it. It gives you 2 additional Program Banks. > > _______________________________________________ > A6 mailing list > A6@code404.com > http://mailman.code404.com/mailman/listinfo/a6 > From soarera6 at gmail.com Fri May 18 06:09:57 2007 From: soarera6 at gmail.com (Soarer A6) Date: Mon Feb 22 19:52:22 2010 Subject: [A6] SRAM Card FS In-Reply-To: <751653.42283.qm@web81205.mail.mud.yahoo.com> References: <253034.70504.qm@web81202.mail.mud.yahoo.com> <751653.42283.qm@web81205.mail.mud.yahoo.com> Message-ID: <21c7b5a00705180609g2bbc21e6i933ef450f9949c4d@mail.gmail.com> If anyone wants to ship to europe let me know. On 5/17/07, Doug Terrebonne wrote: > > I also have a spare 2MB Card (6 additional Program Banks + 4 Mix Banks) > for $65 shipped in the US... > > --- Doug Terrebonne wrote: > > > Hi, I have a 512K Memory Card for $30 shipped in the US if anyone > > wants > > it. It gives you 2 additional Program Banks. > > > > _______________________________________________ > > A6 mailing list > > A6@code404.com > > http://mailman.code404.com/mailman/listinfo/a6 > > > > _______________________________________________ > A6 mailing list > A6@code404.com > http://mailman.code404.com/mailman/listinfo/a6 > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mailman.code404.com/pipermail/a6/attachments/20070518/527bb3db/attachment.htm From russ at whiterose.net Wed May 23 09:18:16 2007 From: russ at whiterose.net (Russell Hoffman) Date: Mon Feb 22 19:52:23 2010 Subject: [A6] Introduction: New A6 Owner Message-ID: Hello, I thought I'd introduce myself to the list. I just ordered my A6 about a week ago, from a local dealer here in Pittsburgh. They said it is expected to arrive around the first week of July, so I have some time to read the manual while I am waiting. Just wanted to say hello. I've been reading the list archives for a while, and wanted to respond to a couple things I've seen here: Regarding the "bad A6's" that don't tune --- I heard from one dealer that there was apparently a small handful of units with this problem. They had sold 6 units in the last few months, and one unit had the issue. They seem to think it is resolved now. Alesis would also neither confirm nor deny any rumors that the A6 is going out of production, and all of the dealers I spoke with about that issue said that Alesis is still taking new orders for the A6, so it doesn't look they are disappearing as yet. I'm eagerly anticipating the arrival of mine! Russ http://www.whiterose.net/~russ/synth.html From kwalker at freenet.co.uk Wed May 23 16:40:18 2007 From: kwalker at freenet.co.uk (Kevin Walker) Date: Mon Feb 22 19:52:23 2010 Subject: [A6] Introduction: New A6 Owner In-Reply-To: References: Message-ID: hi, welcome to the list... bad A6's.. there have been many appear here in th uk. I went through 4 before I found a good one - 2 of those where supposed to be new. the truth is dealers lie a lot. After working for Music Connections, Digital Village and TSC/Computer Warehouse as tech support, you get to see and hear behind the scenes about what goes on... All I can say is test your model in the shop before you take it home. If you have a good one they are truly awsome, a lot of thought was put into this keyboard. I suggest using it with a DAW, you can use the aux/main outs for sereo sounds and the individual outs for drums and mono sounds, this way you can utilise the fx of your daw.... have fun K On 23/05/07, Russell Hoffman wrote: > > Hello, > > I thought I'd introduce myself to the list. I just ordered my A6 > about a week ago, from a local > dealer here in Pittsburgh. They said it is expected to arrive around > the first week of July, so I have some time to read the manual while > I am waiting. Just wanted to say hello. I've been reading the list > archives for a while, and wanted to respond to a couple things I've > seen here: > > Regarding the "bad A6's" that don't tune --- I heard from one dealer > that there was apparently a small > handful of units with this problem. They had sold 6 units in the last > few months, and one unit had > the issue. They seem to think it is resolved now. Alesis would also > neither confirm nor deny any rumors that the A6 is going out of > production, and all of the dealers I spoke with about that issue said > that Alesis is still taking new orders for the A6, so it doesn't look > they are disappearing as yet. > > I'm eagerly anticipating the arrival of mine! > > Russ > > http://www.whiterose.net/~russ/synth.html > _______________________________________________ > A6 mailing list > A6@code404.com > http://mailman.code404.com/mailman/listinfo/a6 > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mailman.code404.com/pipermail/a6/attachments/20070524/ca30b915/attachment.htm From msochynsky at gmail.com Thu May 24 18:38:25 2007 From: msochynsky at gmail.com (michael sochynsky) Date: Mon Feb 22 19:52:23 2010 Subject: [A6] help with sram card Message-ID: hello, i just purchased a "2 MB SRAM Card without Attribute Memory SN5002-P" i am having trouble figuring out how to intialize the card and access the card banks.. the manual says to hit store, then go to card, and the turn soft knob 1 to the right until it asks you to initialize card. when i do this and hit store, it simply says "card error or unitialized." but of course its uninitialized, im trying to initialize it! am i missing something? also, once initialized, how to i access the card banks? where are they located within the menus. similarly, if i want to do a sysex dump onto the card (like a whole bank from the community website), how do i do this? sorry if these are stupid questions, im new! any help would be greatly appreciated. thanks! michael -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mailman.code404.com/pipermail/a6/attachments/20070524/ef95adf4/attachment.htm From jasret at mindspring.com Thu May 24 19:08:53 2007 From: jasret at mindspring.com (Doug Pearson) Date: Mon Feb 22 19:52:23 2010 Subject: [A6] help with sram card Message-ID: <29033296.1180058933174.JavaMail.root@mswamui-bichon.atl.sa.earthlink.net> I had the same problem when I got an SRAM card. The manual leaves out the step where you have to select the *configuration* of the card (number of program banks vs. mix banks) before you press the button to initialize. As for your other questions, the answers should become apparent once you get the card working, since you select the card banks in the exact same way you select the internal banks. Doug -----Original Message----- >From: michael sochynsky >Sent: May 24, 2007 6:38 PM >To: a6@code404.com >Subject: [A6] help with sram card > >hello, i just purchased a "2 MB SRAM Card without Attribute Memory >SN5002-P" > >i am having trouble figuring out how to intialize the card and access the >card banks.. the manual says to hit store, then go to card, and the turn >soft knob 1 to the right until it asks you to initialize card. when i do >this and hit store, it simply says "card error or unitialized." but of >course its uninitialized, im trying to initialize it! am i missing >something? > >also, once initialized, how to i access the card banks? where are they >located within the menus. similarly, if i want to do a sysex dump onto the >card (like a whole bank from the community website), how do i do this? > >sorry if these are stupid questions, im new! > >any help would be greatly appreciated. > >thanks! > >michael From schaltstern at curious-electric.com Thu May 24 21:48:20 2007 From: schaltstern at curious-electric.com (schaltstern) Date: Mon Feb 22 19:52:23 2010 Subject: [A6] help with sram card In-Reply-To: References: Message-ID: This issue and others are solved in the excellent FAQ that is hosted by a very nice person (who btw?) here: http://www.wohmart.com/a6/ Essential reading. Am 25.05.2007, 03:38 Uhr, schrieb michael sochynsky : > hello, i just purchased a "2 MB SRAM Card without Attribute Memory > SN5002-P" > > i am having trouble figuring out how to intialize the card and access the > card banks.. the manual says to hit store, then go to card, and the turn > soft knob 1 to the right until it asks you to initialize card. when i do > this and hit store, it simply says "card error or unitialized." but of > course its uninitialized, im trying to initialize it! am i missing > something? > > also, once initialized, how to i access the card banks? where are they > located within the menus. similarly, if i want to do a sysex dump onto > the > card (like a whole bank from the community website), how do i do this? > From doperobot at yahoo.com Fri May 25 12:42:30 2007 From: doperobot at yahoo.com (J.C. Jordan) Date: Mon Feb 22 19:52:23 2010 Subject: [A6] additions to FAQ? Message-ID: <825131.50221.qm@web32114.mail.mud.yahoo.com> I wrote the FAQ and was wondering if anyone knows stuff that was missed that should be included? The only thing I can think of off the top of my head that still gets consistently asked is "why doesn't the bpm number correspond to an even integer". anything else? if anyone wants to respond to this thread, i can incorporate that stuff. of course, that should drive the traffic on this mailing list down even further. it definitely has been quiet lately. ____________________________________________________________________________________Get the free Yahoo! toolbar and rest assured with the added security of spyware protection. http://new.toolbar.yahoo.com/toolbar/features/norton/index.php From schaltstern at curious-electric.com Fri May 25 12:46:09 2007 From: schaltstern at curious-electric.com (schaltstern) Date: Mon Feb 22 19:52:23 2010 Subject: [A6] additions to FAQ? In-Reply-To: <825131.50221.qm@web32114.mail.mud.yahoo.com> References: <825131.50221.qm@web32114.mail.mud.yahoo.com> Message-ID: Then I have the honour to be the first one (hopefully not) to say - thank you very much for writing it!! Am 25.05.2007, 21:42 Uhr, schrieb J.C. Jordan : > I wrote the FAQ and was wondering if anyone knows stuff that was missed > that > should be included? The only thing I can think of off the top of my head > that > still gets consistently asked is "why doesn't the bpm number correspond > to an > even integer". anything else? if anyone wants to respond to this thread, > i can > incorporate that stuff. > of course, that should drive the traffic on this mailing list down even > further. it definitely has been quiet lately. > > > ____________________________________________________________________________________Get > the free Yahoo! toolbar and rest assured with the added security of > spyware protection. > http://new.toolbar.yahoo.com/toolbar/features/norton/index.php > _______________________________________________ > A6 mailing list > A6@code404.com > http://mailman.code404.com/mailman/listinfo/a6 From kwalker at freenet.co.uk Fri May 25 15:34:34 2007 From: kwalker at freenet.co.uk (Kevin Walker) Date: Mon Feb 22 19:52:24 2010 Subject: [A6] additions to FAQ? In-Reply-To: References: <825131.50221.qm@web32114.mail.mud.yahoo.com> Message-ID: I don't think I have seen this FAQ, what is the URL? On 25/05/07, schaltstern wrote: > > Then I have the honour to be the first one (hopefully not) to say - thank > you very much for writing it!! > > > Am 25.05.2007, 21:42 Uhr, schrieb J.C. Jordan : > > > I wrote the FAQ and was wondering if anyone knows stuff that was missed > > that > > should be included? The only thing I can think of off the top of my head > > that > > still gets consistently asked is "why doesn't the bpm number correspond > > to an > > even integer". anything else? if anyone wants to respond to this thread, > > i can > > incorporate that stuff. > > of course, that should drive the traffic on this mailing list down even > > further. it definitely has been quiet lately. > > > > > > > ____________________________________________________________________________________Get > > the free Yahoo! toolbar and rest assured with the added security of > > spyware protection. > > http://new.toolbar.yahoo.com/toolbar/features/norton/index.php > > _______________________________________________ > > A6 mailing list > > A6@code404.com > > http://mailman.code404.com/mailman/listinfo/a6 > > > _______________________________________________ > A6 mailing list > A6@code404.com > http://mailman.code404.com/mailman/listinfo/a6 > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mailman.code404.com/pipermail/a6/attachments/20070525/19ef327c/attachment.htm From kwalker at freenet.co.uk Fri May 25 16:30:16 2007 From: kwalker at freenet.co.uk (Kevin Walker) Date: Mon Feb 22 19:52:24 2010 Subject: [A6] additions to FAQ? In-Reply-To: <825131.50221.qm@web32114.mail.mud.yahoo.com> References: <825131.50221.qm@web32114.mail.mud.yahoo.com> Message-ID: sorry, I was being lame - I have now read the FAQ... I would have mentioned about the way the VCA's click, even with a little attack... although, I have noticed that rob papen seems to have created patches which don't do this... maybe he knows something I don't - mod routing?? who knows... I will have to look at his patches and compare.... Other than that I would say it is very thorough, well thought out and I enjoyed reading because I learnt a few things I didn't know already.... Kev On 25/05/07, J.C. Jordan wrote: > > I wrote the FAQ and was wondering if anyone knows stuff that was missed > that > should be included? The only thing I can think of off the top of my head > that > still gets consistently asked is "why doesn't the bpm number correspond to > an > even integer". anything else? if anyone wants to respond to this thread, i > can > incorporate that stuff. > of course, that should drive the traffic on this mailing list down even > further. it definitely has been quiet lately. > > > > ____________________________________________________________________________________Get > the free Yahoo! toolbar and rest assured with the added security of spyware > protection. > http://new.toolbar.yahoo.com/toolbar/features/norton/index.php > _______________________________________________ > A6 mailing list > A6@code404.com > http://mailman.code404.com/mailman/listinfo/a6 > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mailman.code404.com/pipermail/a6/attachments/20070526/9a35f396/attachment.htm From coolcolj at optushome.com.au Fri May 25 20:29:07 2007 From: coolcolj at optushome.com.au (Colin Chung) Date: Mon Feb 22 19:52:24 2010 Subject: [A6] Introduction: New A6 Owner References: Message-ID: <003001c79f46$053dc5d0$5408efdc@co3000977a> I read somewhere the new ones these days are made somewhere else the older ones like my slightly customised model were made in the USA :) ----- Original Message ----- From: "Russell Hoffman" To: Sent: Thursday, May 24, 2007 2:18 AM Subject: [A6] Introduction: New A6 Owner > Hello, > > I thought I'd introduce myself to the list. I just ordered my A6 > about a week ago, from a local > dealer here in Pittsburgh. They said it is expected to arrive around > the first week of July, so I have some time to read the manual while > I am waiting. Just wanted to say hello. I've been reading the list > archives for a while, and wanted to respond to a couple things I've > seen here: > > Regarding the "bad A6's" that don't tune --- I heard from one dealer > that there was apparently a small > handful of units with this problem. They had sold 6 units in the last > few months, and one unit had > the issue. They seem to think it is resolved now. Alesis would also > neither confirm nor deny any rumors that the A6 is going out of > production, and all of the dealers I spoke with about that issue said > that Alesis is still taking new orders for the A6, so it doesn't look > they are disappearing as yet. From lyle at zevion.com Fri May 25 21:42:40 2007 From: lyle at zevion.com (L. Bainbridge) Date: Mon Feb 22 19:52:24 2010 Subject: [A6] Introduction: New A6 Owner In-Reply-To: <003001c79f46$053dc5d0$5408efdc@co3000977a> References: <003001c79f46$053dc5d0$5408efdc@co3000977a> Message-ID: <001201c79f50$4d2c56e0$0301a8c0@ozone> Mine was made in Taiwan. -----Original Message----- From: a6-bounces@code404.com [mailto:a6-bounces@code404.com] On Behalf Of Colin Chung Sent: Friday, May 25, 2007 10:29 PM To: a6@code404.com Subject: Re: [A6] Introduction: New A6 Owner I read somewhere the new ones these days are made somewhere else the older ones like my slightly customised model were made in the USA :) ----- Original Message ----- From: "Russell Hoffman" To: Sent: Thursday, May 24, 2007 2:18 AM Subject: [A6] Introduction: New A6 Owner > Hello, > > I thought I'd introduce myself to the list. I just ordered my A6 > about a week ago, from a local > dealer here in Pittsburgh. They said it is expected to arrive around > the first week of July, so I have some time to read the manual while > I am waiting. Just wanted to say hello. I've been reading the list > archives for a while, and wanted to respond to a couple things I've > seen here: > > Regarding the "bad A6's" that don't tune --- I heard from one dealer > that there was apparently a small > handful of units with this problem. They had sold 6 units in the last > few months, and one unit had > the issue. They seem to think it is resolved now. Alesis would also > neither confirm nor deny any rumors that the A6 is going out of > production, and all of the dealers I spoke with about that issue said > that Alesis is still taking new orders for the A6, so it doesn't look > they are disappearing as yet. _______________________________________________ A6 mailing list A6@code404.com http://mailman.code404.com/mailman/listinfo/a6 From coolcolj at optushome.com.au Sat May 26 15:02:41 2007 From: coolcolj at optushome.com.au (Colin Chung) Date: Mon Feb 22 19:52:24 2010 Subject: [A6] Introduction: New A6 Owner References: <003001c79f46$053dc5d0$5408efdc@co3000977a> Message-ID: <005801c79fe1$95785de0$1403efdc@co3000977a> Just some spiffed up knobs :) All the knob tops are painted in some metallic silver scheme and ones under the screen are bigger - like the Envelope ones - very handy as it makes changing values much less sensitive! IMO this is how the A6 should have come from the factory.... ----- Original Message ----- From: "elmacaco" To: "Colin Chung" Sent: Sunday, May 27, 2007 3:58 AM Subject: Re: [A6] Introduction: New A6 Owner > slightly customized? > > I remember they pulled one together for you after the numark thing because > you waited for a long time and someone online heard you, but what is custom? > > Peace > > Ed > ----- Original Message ----- > From: "Colin Chung" > To: > Sent: Friday, May 25, 2007 10:29 PM > Subject: Re: [A6] Introduction: New A6 Owner > > > >I read somewhere the new ones these days are made somewhere else > > the older ones like my slightly customised model were made in the USA :) From leo.lydia at wanadoo.nl Sun May 27 14:18:36 2007 From: leo.lydia at wanadoo.nl (Leo &Lydia) Date: Mon Feb 22 19:52:24 2010 Subject: [A6] re:Introduction: New A6 Owner (sunny pedaal) Message-ID: and ones under the screen are bigger - like the Envelope ones - very handy as it makes changing values much less sensitive! IMO this is how the A6 should have come from the factory.... also changed the a6 this way, with the exception maybe i only changed the topline under the screen for bigger knobs. gives even more space to turn the knobs and i found out that the 4 top ones are used in most of the cases anyway. ( took the big knobs from fine tune and keytrack) agree itr much more handy fr.gr. sunny From joant at ieee.org Sun May 27 17:30:06 2007 From: joant at ieee.org (Joan Touzet) Date: Mon Feb 22 19:52:24 2010 Subject: [A6] additions to FAQ? In-Reply-To: <825131.50221.qm@web32114.mail.mud.yahoo.com> References: <825131.50221.qm@web32114.mail.mud.yahoo.com> Message-ID: How about a companion tutorial? I know a few out there exist, but perhaps you could suggest some links and beginner/intermediate tutorials? On 5/25/07, J.C. Jordan wrote: > I wrote the FAQ and was wondering if anyone knows stuff that was missed that > should be included? The only thing I can think of off the top of my head that > still gets consistently asked is "why doesn't the bpm number correspond to an > even integer". anything else? if anyone wants to respond to this thread, i can > incorporate that stuff. > of course, that should drive the traffic on this mailing list down even > further. it definitely has been quiet lately. > > > > ____________________________________________________________________________________Get the free Yahoo! toolbar and rest assured with the added security of spyware protection. > http://new.toolbar.yahoo.com/toolbar/features/norton/index.php > _______________________________________________ > A6 mailing list > A6@code404.com > http://mailman.code404.com/mailman/listinfo/a6 > From coolcolj at optushome.com.au Thu May 31 16:50:33 2007 From: coolcolj at optushome.com.au (Colin Chung) Date: Mon Feb 22 19:52:24 2010 Subject: [A6] Envelope delay parameter for snappier sounds..... Message-ID: <001701c7a3de$7afd5b40$a60defdc@co3000977a> I don't remeber if I ahve mentioned this before but I find the A6 a lot snappier/crisper if you set the delay parameter for Envelope 1 and 2 to 2ms... gets rid of the boinkiness -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mailman.code404.com/pipermail/a6/attachments/20070601/82ceeb06/attachment.htm From coolcolj at optushome.com.au Thu May 31 16:51:56 2007 From: coolcolj at optushome.com.au (Colin Chung) Date: Mon Feb 22 19:52:24 2010 Subject: [A6] Envelope delay parameter for snappier sounds..... References: <001701c7a3de$7afd5b40$a60defdc@co3000977a> Message-ID: <002701c7a3de$acb1d030$a60defdc@co3000977a> Sorry I meant Envelope 3 and 2 - amp and filter ----- Original Message ----- From: Colin Chung To: a6@code404.com Sent: Friday, June 01, 2007 9:50 AM Subject: [A6] Envelope delay parameter for snappier sounds..... I don't remeber if I ahve mentioned this before but I find the A6 a lot snappier/crisper if you set the delay parameter for Envelope 1 and 2 to 2ms... gets rid of the boinkiness _______________________________________________ A6 mailing list A6@code404.com http://mailman.code404.com/mailman/listinfo/a6 From kwalker at freenet.co.uk Thu May 31 17:26:08 2007 From: kwalker at freenet.co.uk (Kevin Walker) Date: Mon Feb 22 19:52:24 2010 Subject: [A6] Envelope delay parameter for snappier sounds..... In-Reply-To: <002701c7a3de$acb1d030$a60defdc@co3000977a> References: <001701c7a3de$7afd5b40$a60defdc@co3000977a> <002701c7a3de$acb1d030$a60defdc@co3000977a> Message-ID: isn't that the lowest value, they go to? On 01/06/07, Colin Chung wrote: > > Sorry I meant Envelope 3 and 2 - amp and filter > > ----- Original Message ----- > From: Colin Chung > To: a6@code404.com > Sent: Friday, June 01, 2007 9:50 AM > Subject: [A6] Envelope delay parameter for snappier sounds..... > > > I don't remeber if I ahve mentioned this before > > but I find the A6 a lot snappier/crisper if you set the delay parameter > for > Envelope 1 and 2 > to 2ms... > > gets rid of the boinkiness > > > > _______________________________________________ > A6 mailing list > A6@code404.com > http://mailman.code404.com/mailman/listinfo/a6 > > _______________________________________________ > A6 mailing list > A6@code404.com > http://mailman.code404.com/mailman/listinfo/a6 > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mailman.code404.com/pipermail/a6/attachments/20070601/5106d904/attachment.htm From coolcolj at optushome.com.au Thu May 31 17:30:44 2007 From: coolcolj at optushome.com.au (Colin Chung) Date: Mon Feb 22 19:52:25 2010 Subject: [A6] Envelope delay parameter for snappier sounds..... References: <001701c7a3de$7afd5b40$a60defdc@co3000977a> <002701c7a3de$acb1d030$a60defdc@co3000977a> Message-ID: <004201c7a3e4$180ec2c0$a60defdc@co3000977a> yes I guess :) ----- Original Message ----- From: Kevin Walker To: Colin Chung Cc: A6@code404.com Sent: Friday, June 01, 2007 10:26 AM Subject: Re: [A6] Envelope delay parameter for snappier sounds..... isn't that the lowest value, they go to? On 01/06/07, Colin Chung wrote: Sorry I meant Envelope 3 and 2 - amp and filter ----- Original Message ----- From: Colin Chung To: a6@code404.com Sent: Friday, June 01, 2007 9:50 AM Subject: [A6] Envelope delay parameter for snappier sounds..... I don't remeber if I ahve mentioned this before but I find the A6 a lot snappier/crisper if you set the delay parameter for Envelope 1 and 2 to 2ms... gets rid of the boinkiness From coolcolj at optushome.com.au Thu May 31 18:04:11 2007 From: coolcolj at optushome.com.au (Colin Chung) Date: Mon Feb 22 19:52:25 2010 Subject: [A6] Andromeda Sync arp clip Message-ID: <004d01c7a3e8$c478cde0$a60defdc@co3000977a> messing around with a sound I did today. Fun :) the 2ms envelope delay makes it really snap, and I'm only using the fast settings for the engine optimiser, not the clicky ultra setting. basicly a sync tone, arp'ed and latched on the A6, delay is from A6. Then I was mucking with the settings etc There is some convultion reverb from the back of a van for ambience :P http://www.members.optushome.com.au/coolcolj/SoundBites/CC_A6_SyncArp.mp3 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mailman.code404.com/pipermail/a6/attachments/20070601/bdd8223b/attachment.htm From russ at whiterose.net Thu May 31 18:37:48 2007 From: russ at whiterose.net (Russell Hoffman) Date: Mon Feb 22 19:52:25 2010 Subject: [A6] Andromeda Sync arp clip In-Reply-To: <004d01c7a3e8$c478cde0$a60defdc@co3000977a> References: <004d01c7a3e8$c478cde0$a60defdc@co3000977a> Message-ID: Colin, Sounds great! Making me really wish my new A6 would get here sooner. They said six weeks, two weeks ago, so I have four weeks left until it arrives! Russ On May 31, 2007, at 9:04 PM, Colin Chung wrote: > messing around with a sound I did today. Fun :) > > the 2ms envelope delay makes it really snap, and I'm only using the > fast settings > for the engine optimiser, not the clicky ultra setting. > > basicly a sync tone, arp'ed and latched on the A6, delay is from A6. > Then I was mucking with the settings etc > There is some convultion reverb from the back of a van for ambience :P > > http://www.members.optushome.com.au/coolcolj/SoundBites/ > CC_A6_SyncArp.mp3 > > > > _______________________________________________ > A6 mailing list > A6@code404.com > http://mailman.code404.com/mailman/listinfo/a6 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mailman.code404.com/pipermail/a6/attachments/20070531/6933d6ff/attachment.htm From coolcolj at optushome.com.au Thu May 31 19:03:21 2007 From: coolcolj at optushome.com.au (Colin Chung) Date: Mon Feb 22 19:52:25 2010 Subject: [A6] Envelope delay parameter for snappier sounds..... References: <001701c7a3de$7afd5b40$a60defdc@co3000977a><002701c7a3de$acb1d030$a60defdc@co3000977a> <004201c7a3e4$180ec2c0$a60defdc@co3000977a> <000a01c7a3ef$df374100$0301a8c0@ozone> Message-ID: <000e01c7a3f1$07c42790$a60defdc@co3000977a> I'm talking about the delay parameter, not the attack ;) ----- Original Message ----- From: "L. Bainbridge" To: "'Colin Chung'" Sent: Friday, June 01, 2007 11:55 AM Subject: RE: [A6] Envelope delay parameter for snappier sounds..... > > I thought he was talking about the delay parameter of the envelopes, not the > attack. The delay can be turned off entirely, and 2ms is the first > increment. However, the attack has a minimum value of 2ms. > > Boinkiness. That's a good one. I dunno about in Oz, but over here to Boink > is to...well...you know! But boinkiness is a new word to me. I could use > that in conversion. Something like "I got rid of my girlfriends > boinkiness....I married her. Worked like a charm.". > > Cheers > > -----Original Message----- > From: a6-bounces@code404.com [mailto:a6-bounces@code404.com] On Behalf Of > Colin Chung > Sent: Thursday, May 31, 2007 7:31 PM > To: Kevin Walker > Cc: A6@code404.com > Subject: Re: [A6] Envelope delay parameter for snappier sounds..... > > yes I guess :) > > ----- Original Message ----- > From: Kevin Walker > To: Colin Chung > Cc: A6@code404.com > Sent: Friday, June 01, 2007 10:26 AM > Subject: Re: [A6] Envelope delay parameter for snappier sounds..... > > > isn't that the lowest value, they go to? > > > On 01/06/07, Colin Chung wrote: > Sorry I meant Envelope 3 and 2 - amp and filter > > ----- Original Message ----- > From: Colin Chung > To: a6@code404.com > Sent: Friday, June 01, 2007 9:50 AM > Subject: [A6] Envelope delay parameter for snappier sounds..... > > > I don't remeber if I ahve mentioned this before > > but I find the A6 a lot snappier/crisper if you set the delay parameter for > Envelope 1 and 2 to 2ms... > > gets rid of the boinkiness > > > _______________________________________________ > A6 mailing list > A6@code404.com > http://mailman.code404.com/mailman/listinfo/a6 > From scottmetzger at gmail.com Thu May 31 19:04:19 2007 From: scottmetzger at gmail.com (Scott Metzger) Date: Mon Feb 22 19:52:25 2010 Subject: [A6] Andromeda Sync arp clip In-Reply-To: <004d01c7a3e8$c478cde0$a60defdc@co3000977a> References: <004d01c7a3e8$c478cde0$a60defdc@co3000977a> Message-ID: That's great!! I am still waiting to run my Andy compressed via Distressors, and a Roland SRE-555 for ultimate Analogue destruction. On 5/31/07, Colin Chung wrote: > > > messing around with a sound I did today. Fun :) > > the 2ms envelope delay makes it really snap, and I'm only using the fast > settings > for the engine optimiser, not the clicky ultra setting. > > basicly a sync tone, arp'ed and latched on the A6, delay is from A6. > Then I was mucking with the settings etc > There is some convultion reverb from the back of a van for ambience :P > > http://www.members.optushome.com.au/coolcolj/SoundBites/CC_A6_SyncArp.mp3 > > > > _______________________________________________ > A6 mailing list > A6@code404.com > http://mailman.code404.com/mailman/listinfo/a6 > > From coolcolj at optushome.com.au Thu May 31 19:05:42 2007 From: coolcolj at optushome.com.au (Colin Chung) Date: Mon Feb 22 19:52:25 2010 Subject: [A6] Andromeda Sync arp clip References: <004d01c7a3e8$c478cde0$a60defdc@co3000977a> Message-ID: <002201c7a3f1$5c4af2d0$a60defdc@co3000977a> thanks, A6 really good at that stuff, interesting arp it has probbaly could replicate it with a software one though damn that's a long wait ...... then again I probably waited even longer for mine :) I remeber when they first came out, after I ordered, it must have been months and months.. ----- Original Message ----- From: Russell Hoffman To: a6@code404.com Sent: Friday, June 01, 2007 11:37 AM Subject: Re: [A6] Andromeda Sync arp clip Colin, Sounds great! Making me really wish my new A6 would get here sooner. They said six weeks, two weeks ago, so I have four weeks left until it arrives! Russ From coolcolj at optushome.com.au Thu May 31 19:11:37 2007 From: coolcolj at optushome.com.au (Colin Chung) Date: Mon Feb 22 19:52:25 2010 Subject: [A6] Andromeda Sync arp clip References: <004d01c7a3e8$c478cde0$a60defdc@co3000977a> Message-ID: <002d01c7a3f2$2f786160$a60defdc@co3000977a> I actually have both of those units here as well :) sounds good through the distressor with 2nd harmonic distortion mode on adds that glow while crushing before and after - plus 2 setups on the distressor http://www.members.optushome.com.au/coolcolj/SoundBites/CCJ_Distressor_A6Seq uence.mp3 ----- Original Message ----- From: "Scott Metzger" To: "Colin Chung" Cc: Sent: Friday, June 01, 2007 12:04 PM Subject: Re: [A6] Andromeda Sync arp clip > That's great!! I am still waiting to run my Andy compressed via > Distressors, and a Roland SRE-555 for ultimate Analogue destruction. > From scottmetzger at gmail.com Thu May 31 19:27:46 2007 From: scottmetzger at gmail.com (Scott Metzger) Date: Mon Feb 22 19:52:25 2010 Subject: [A6] Andromeda Sync arp clip In-Reply-To: <002d01c7a3f2$2f786160$a60defdc@co3000977a> References: <004d01c7a3e8$c478cde0$a60defdc@co3000977a> <002d01c7a3f2$2f786160$a60defdc@co3000977a> Message-ID: That's great! I guess great minds think a like! :) Yeah I am waiting for Analogue Haven to get their Empirical Labs shipment, and one of my SRE-555's came back from a Repair shop, but they fucked up Reverb, so now I have to take it to another company to get it done right. I brought 2 SRE's in. 1 was working great it was for reference, the other had a slower tape delay. So after I hunted down a new motor I get everything back, and I now think all they did was make my working machine run slower to match. Very fustrating. Never have problems with my CS80, but I do have tons with these SRE's. Do you have anymore Distressor recordings? I would love to hear one of your mixes using the Distressor. On 5/31/07, Colin Chung wrote: > I actually have both of those units here as well :) > > sounds good through the distressor with 2nd harmonic distortion mode on > adds that glow while crushing > > before and after - plus 2 setups on the distressor > http://www.members.optushome.com.au/coolcolj/SoundBites/CCJ_Distressor_A6Seq > uence.mp3 > > > > ----- Original Message ----- > From: "Scott Metzger" > To: "Colin Chung" > Cc: > Sent: Friday, June 01, 2007 12:04 PM > Subject: Re: [A6] Andromeda Sync arp clip > > > > That's great!! I am still waiting to run my Andy compressed via > > Distressors, and a Roland SRE-555 for ultimate Analogue destruction. > > > > From coolcolj at optushome.com.au Thu May 31 20:08:45 2007 From: coolcolj at optushome.com.au (Colin Chung) Date: Mon Feb 22 19:52:25 2010 Subject: [A6] Andromeda Sync arp clip References: <004d01c7a3e8$c478cde0$a60defdc@co3000977a> <002d01c7a3f2$2f786160$a60defdc@co3000977a> Message-ID: <000701c7a3fa$2abc8d60$a60defdc@co3000977a> Distressor is not something I run a whole mix through, plus I only have one of em :) I have it processing a few other things here - SH2 kick and bass with 3rd harmonic and 2nd harmonic distortion modes as named http://www.members.optushome.com.au/coolcolj/SoundBites/ ----- Original Message ----- From: "Scott Metzger" To: "Colin Chung" Cc: Sent: Friday, June 01, 2007 12:27 PM Subject: Re: [A6] Andromeda Sync arp clip > That's great! I guess great minds think a like! > > :) > > Yeah I am waiting for Analogue Haven to get their Empirical Labs > shipment, and one of my SRE-555's came back from a Repair shop, but > they fucked up Reverb, so now I have to take it to another company to > get it done right. I brought 2 SRE's in. 1 was working great it was > for reference, the other had a slower tape delay. So after I hunted > down a new motor I get everything back, and I now think all they did > was make my working machine run slower to match. > > Very fustrating. Never have problems with my CS80, but I do have tons > with these SRE's. > > Do you have anymore Distressor recordings? I would love to hear one > of your mixes using the Distressor. > > > > On 5/31/07, Colin Chung wrote: > > I actually have both of those units here as well :) > > > > sounds good through the distressor with 2nd harmonic distortion mode on > > adds that glow while crushing > > > > before and after - plus 2 setups on the distressor > > http://www.members.optushome.com.au/coolcolj/SoundBites/CCJ_Distressor_A6Seq > > uence.mp3 > > > > > > > > ----- Original Message ----- > > From: "Scott Metzger" > > To: "Colin Chung" > > Cc: > > Sent: Friday, June 01, 2007 12:04 PM > > Subject: Re: [A6] Andromeda Sync arp clip > > > > > > > That's great!! I am still waiting to run my Andy compressed via > > > Distressors, and a Roland SRE-555 for ultimate Analogue destruction. > > > > > > >