[A6] mix mode

[Eduardo Saponara]

Well after that it should be easy. say, 4 poly sounds out of Main and Aux outs, say 3 voices of poly each, that takes out 12 voices, say you then have 2 mono patches taken out of their indi outs, you only have 2 more voice outs to deal with, then you can do that where you have your polyphonic part made up of 2 mono programs assigned to the outs. If you think about it, it isn't that hard, or that terrible.  You can also assign more than 4 poly sounds to the main and aux outs, some may not need individual treatment.> Date: Mon, 19 Nov 2007 12:04:29 -0500> From: null at dys4ik.com> Subject: Re: [A6] mix mode> CC: a6 at code404.com> > As the A6 is my only real synth right now, I was hoping to get maybe> six, but four will do for now.> > Thanks for the suggestion!> > On Nov 19, 2007 9:44 AM, Eduardo Saponara <elmacaco at hotmail.com> wrote:> >> > I also hoped it would work more like the xpander when you can assign voices> > to patches, but with the Andromeda it basically comes down to assigning> > voices to the mono channels, and using the stereo and aux outs for> > polyphonic mix channels. You only get 4, but how many do you really need?> >> >> >> > > Date: Sun, 18 Nov 2007 23:22:21 -0500> > > From: null at dys4ik.com> > > Subject: Re: [A6] mix mode> > > CC: a6 at code404.com> >> >> > >> > > I sort of answered my own question just after writing this, but it> > > seems like an unfriendly answer:> > >> > > setting several voices to mono and to use the same program, triggered> > > from different midi channels.> > >> > > On Nov 18, 2007 11:14 PM, Andrew Eaton <null at dys4ik.com> wrote:> > > > So on a related note, I was wondering if anyone knows if it is> > > > possible to limit a program to just a few voices (i.e. 2 or 4 voice> > > > poly).> > > >> > > > I ask because I'm trying to record individual voices out to run> > > > real-time fx, but in poly mode I can't predict which voice a program> > > > will run on and in mono mode I am limited to one note at a time.> > > >> > > >> > > > On Nov 18, 2007 3:10 PM, Doug Pearson <jasret at mindspring.com> wrote:> > > > > 1) Do all of the patches using sequencers/arpegiators work> > individually in program mode?> > > > >> > > > > 2) Go through the mix you've created. For each program (channel) in> > the mix, test it by disabling all the other programs (channels) in the mix.> > Ensure that each program in the mix will play individually in that manner.> > > > >> > > > > 3) Check your MIXVOX settings for each channel in the mix. If you have> > two monophonic programs set to the same mix voice, for instance, you won't> > be able to play the two sounds simultaneously because they'll be competing> > for the same voice. The same applies (more so!) to sequences and arpeggios.> > > > >> > > > > I've successfully used multiple simultaneous sequences in mix mode,> > but it can be a bit tricky to have everything set up correctly to work> > together (and often very tricky to play if different sequences need to> > "synch" to each other). MUCH patience is required! And, in general, I've> > found that trying to use multiple sequences simultaneously in mix mode is> > one of the best ways to get the A6 to hang/crash (even worse if you're> > trying to use the sustain pedal on sequences), so keep that issue in mind,> > too ...> > > > >> > > > > Good luck,> > > > >> > > > > Doug> > > > >> > > > > -----Original Message-----> > > > > >From: Synthwall Synthwall <synthwall at yahoo.com>> > > > > >Sent: Nov 18, 2007 11:24 AM> > > > > >To: a6 at code404.com> > > > > >Subject: [A6] mix mode> > > > > >> > > > > >hello all> > > > > > i have a problem in the mix mode> > > > > > if i make layers from sequences and arps from my programs in mix> > mode> > > > > > sometimes i haer the seqences and sometimes not, sometimes i haer> > only the note or the 1 st note> > > > > > sometimes he try to play the seq but its not really working (but i> > hear something)> > > > > > but sometimes it dous work> > > > > > it looks like he is not always taking the program> > > > > > its not that i allraedy used all the availeble voices !!> > > > > > strange someone know what i mean> > > > > > i have the laters OS> > > > > > anyway its great to make layers from multiple sequences !!!!! (if> > its allways working) !!!!> > > > > >> > > > > > thanks greets> > > > > > Synthwall> > > > >> > > > > _______________________________________________> > > > > A6 mailing list> > > > > A6 at code404.com> > > > > http://mailman.code404.com/mailman/listinfo/a6> > > > >> > > > >> > > >> > > _______________________________________________> > > A6 mailing list> > > A6 at code404.com> > > http://mailman.code404.com/mailman/listinfo/a6> >> >> > ________________________________> > Get the power of Windows + Web with the new Windows Live. Power up!> _______________________________________________> A6 mailing list> A6 at code404.com> http://mailman.code404.com/mailman/listinfo/a6
_________________________________________________________________
Share life as it happens with the new Windows Live.Download today it's FREE!
http://www.windowslive.com/share.html?ocid=TXT_TAGLM_Wave2_sharelife_112007
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.code404.com/pipermail/a6/attachments/20071119/550b9baf/attachment-0001.htm